China ọnụ ala dị ala maka China Electric mkpuchi mkpuchi Green Epoxy Glass Fabric Laminate Sheet (G11) ndị na-emepụta na ndị na-ebupụ

Ọnụ ala kacha ala maka mkpuchi ọkụ eletrik nke China Green Epoxy Glass Fabric Laminate Sheet (G11)

Ọnụ ala dị ala maka mkpuchi ọkụ eletrik nke China Green Epoxy Glass Fabric Laminate Sheet (G11) Foto egosipụtara

nkowa nkenke:

EPGC usoro Epoxy Glass Cloth Rigid Laminated Mpempe akwụkwọ mejupụtara akwa kpara akpa nke etinyere na resin epoxy thermoseting, nke etinyere n'okpuru oke okpomọkụ na nrụgide dị elu. Uwe iko a kpara akpa ga-abụ nke enweghị alkali ma jiri silane na-ejikọta ya. Oghere Usoro EPGC gụnyere EPGC201 (NMEMA G10), EPGC202(NEMA FR4), EPGC203(NEMA G11), EPGC204 (NEMA FR5), EPGC306 na EPGC308.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Anyị adịla njikere ịkọrọ anyị ihe ọmụma gbasara mgbasa ozi n'ụwa niile ma na-akwado gị ngwaahịa dabara adaba na ọnụ ahịa kacha ike. Ngwa Profi na-ewetara gị ezigbo ọnụ ahịa ego ma anyị adịla njikere imepụta ibe anyị ọnụ ahịa kacha ala maka China Electric Insulation Green Epoxy Glass Fabric Laminate Sheet (G11), echiche nkwado anyị bụ ịkwụwa aka ọtọ, ike ike, eziokwu na ihe ọhụrụ. Site n'enyemaka, anyị ga-akawanye mma.
Anyị adịla njikere ịkọrọ anyị ihe ọmụma gbasara mgbasa ozi n'ụwa niile ma na-akwado gị ngwaahịa dabara adaba na ọnụ ahịa kacha ike. Ngwa Profi na-ewetara gị ọnụ ahịa ego dị mma ma anyị adịla njikere iji mepụta ibe anyịChina G11 mpempe akwụkwọ, Mpempe akwụkwọ fiberglass, Na ihe mgbaru ọsọ nke "efu ntụpọ". Iji lekọta gburugburu ebe obibi, na nlọghachi mmekọrịta mmadụ na ibe ya, ọrụ nlekọta ndị ọrụ na-elekọta mmadụ dị ka ọrụ nke ya. Anyị na-anabata ndị enyi si n'akụkụ ụwa niile ka ha bịa leta ma duzie anyị ka anyị wee nweta ihe mgbaru ọsọ mmeri ọnụ.

Ibé akwụkwọ EPGC (klaasị okpomọkụ: B～H), emepụtara dịka kwa IEC60893-3-2. Mpempe akwụkwọ ndị a nwere ike nrụzi dị mma (ọnụego njigide ike steeti thermal nwere ike iru 50%) n'okpuru ọnọdụ okpomọkụ ma ọ bụ steeti thermal, yana akụrụngwa eletrik kwụsiri ike (ihe mkpuchi mkpuchi mgbe imikpu ruru 1012Ω) na ọnọdụ iru mmiri dị elu. Nakwa na elu voltaji ntachi obi / iguzogide voltaji (karịa 35kV), yiri lamination. EPGC202, EPGC204 na EPGC306 nwekwara ezigbo ihe na-egbochi ire ọkụ. Ibé akwụkwọ ahụ gafekwara nchọpụta ihe na-egbu egbu na nke dị ize ndụ (ya na mkpesa RoHS).

Ejiri ya dị ka akụkụ ihe mkpuchi mkpuchi na klas BH eletriki eletriki akụrụngwa, nke nwere ihe nguzogide ọkụ chọrọ ma ọ bụ enweghị, ma ọ bụ ngwa ndị ọzọ.

Ọkpụrụkpụ dị:0.30mm ~ 200mm

Nha mpempe akwụkwọ dị:
1500mm * 3000mm, 1220mm * 3000mm, 1020mm * 3000mm, 1020mm * 2440mm, 1220mm * 2440mm, 1500mm * 2440mm, 1000mm * 20000mm size na ndị ọzọ size.

WPS图片-修改尺寸(LJK)
SMC-4(1)

Nkewa na ụdị mpempe akwụkwọ Epgc

Ụdị aha				Ngwa & atụmatụ	Klas okpomọkụ
D&F	GB/IEC	NEMA	ndị ọzọ	Ngwa & atụmatụ	Klas okpomọkụ
DF201	EPGC201	G10	Hgw 2372	Maka igwe eji arụ ọrụ, ngwa eletriki na elektrọn. Na elu ike n'okpuru ọkara okpomọkụ, magburu onwe arc resistance na elu PTI na CTI	B 130 ℃
DF202	EPGC202	FR-4	Hgw 2372.1,F881	Yiri EPGC201, inwe ihe na-egbochi ire ọkụ.	B 130 ℃
DF202A	-	-	-	Yiri DF202, mana nwere ike igwe dị elu.	B 130 ℃
DF203	EPGC203	G11	Hgw2372.4	Maka igwe, ngwa eletriki na elektrọn. Na ike kasị elu n'okpuru etiti okpomọkụ	F 155 ℃
DF204	EPGC204	FR-5	Hgw 2372.2	Yiri DF203, inwe ihe mgbochi ọkụ ekwuputara.	F 155 ℃
DF306	EPGC306	-	DF336	Yiri DF203, inwe magburu onwe ire ọkụ na-eguzogide, arc na-eguzogide na elu PTI.	F 155 ℃
DF306A	-	-	-	Yiri DF306, mana inwe ike igwe dị elu.	F 155 ℃
DF308	EPGC308	-	-	Yiri DF203, mana nwere nkwụsi ike ọkụ ka mma.	H 180 ℃

Nka na ụzụ chọrọ

Ọdịdị
N'elu mpempe akwụkwọ ga-adị larịị ma dị nro, na-enweghị ikuku ikuku, wrinkles ma ọ bụ cracks na ezi uche na-enweghị obere ezughị okè ndị ọzọ dị ka scratches, dents, wdg. N'ọnụ nke mpempe akwụkwọ ga-adị mma ma bụrụ nke na-enweghị delamination na cracks. Agba ga-abụ otu nke ukwuu, mana ntụpọ ole na ole ka kwere.

Ọkpụrụkpụ ọnụ na ndidiNkeji: mm

Ọkpụrụkpụ aha

Ngbanwe

Ọkpụrụkpụ niminal

Ngbanwe

0.5,0,6

0.8, 1.0

1.2

1.5

2.0

2.5

3.0

4.0

5.0

6.0

8.0

+/- 0.15

+/- 0.18

+/- 0.21

+/- 0.25

+/- 0.30

+/- 0.33

+/- 0.37

+/- 0.45

+/- 0.52

+/- 0.60

+/- 0.72

+/- 0.82

+/- 0.94

+/- 1.02

+/- 1.12

+/- 1.30

+/- 1.50

+/- 1.70

+/- 1.85

+/- 2.10

+/- 2.45

+/- 2.60

+/- 2.80

Okwu: Maka mpempe akwụkwọ nke ọkpụrụkpụ na-abụghị aha aha edepụtaghị na Tebụlụ a, ngbanwe ekwere ga-abụ otu nke ọkpụrụkpụ na-esote.

Na-ehulata Deflection maka Ibé akwụkwọNkeji: mm

Ọkpụrụkpụ

Na-ehulata ngbanwe

3.0-6.0

6.0 ~ 8.0

8.0

≤10

≤8

≤6

Nhazi igwe:
Ibé akwụkwọ ahụ agaghị enwekwa mgbawa na ntupu mgbe a na-etinye ụdị igwe dị ka ịwa osisi, mkpọpu ihe, ịsa akwa na igwe igwe.

Njirimara anụ ahụ, Mechanical na Dielectric

Mba.	Njirimara		Nkeji	EPGC201		EPGC202		EPGC203
Mba.	Njirimara		Nkeji	Ụkpụrụ ọkọlọtọ	Uru a na-ahụkarị	Ụkpụrụ ọkọlọtọ	Uru a na-ahụkarị	Ụkpụrụ ọkọlọtọ	Uru a na-ahụkarị
1	Mmiri absorption (2mm mpempe akwụkwọ)		mg	≤20	8	≤20	9	≤20	9
2	Ike mgbanwe	N'ọnọdụ nkịtị	MPa	≥340	460	≥340	500	≥340	450
2	(N'ogologo)	155 ℃+/-2 ℃	MPa	-	-	-	-	≥170	240
3	Ike mmetụta, yiri laminations (Charpy, notch)		kJ/m2	≥33	53	≥33	51	≥33	50
4	Electric ike, perpendicular ka laminations (na transformer mmanụ na 90 ℃ +/-2 ℃)		kV/mm	≥11.8	17	≥11.8	17	≥11.8	18
5	Eletrik ike, yiri laminations (na transformer mmanụ na 90 ℃ +/-2 ℃)		kV	≥35	48	≥35	45	≥35	45
6	Ihe mgbasa dielectric (1MHz)		-	≤0.04	0.02	≤0.04	0.02	≤0.04	0.021
7	Dielectric mgbe niile (1 MHz)		-	≤5.5	4.8	≤5.5	4.7	≤5.5	4.7
8	Nguzogide Arc		s	-	-	-	182	-	182
9	Ihe nguzogide nsochi (PTI)		V	-	-	-	600	-	600
10	Mkpuchi mkpuchi mgbe imikpu n'ime mmiri		MM	≥5.0×104	2.1 x107	≥5.0×104	1.5 x106	≥5.0×104	1.1 x107
11	Ọkụ ọkụ		Ọkwa	-	-	V-0	V-0	-	-
12	Ndekọ okpomọkụ (TI)		-	≥130		≥130		≥155
Mba.	Njirimara		Nkeji	EPGC204		EPGC306		EPGC308
Mba.	Njirimara		Nkeji	Ụkpụrụ ọkọlọtọ	Uru a na-ahụkarị	Ụkpụrụ ọkọlọtọ	Uru a na-ahụkarị	Ụkpụrụ ọkọlọtọ	Uru a na-ahụkarị
1	Mmụba mmiri (2mm)		mg	≤20	11	≤20	8	≤20	9
2	Ike mgbanwe	N'ọnọdụ nkịtị	MPa	≥340	480	≥340	460	≥340	500
2	(Lengwiz)	155 ℃+/-2 ℃	MPa	≥170	260	≥170	280	-	270
3	Ike mmetụta, yiri laminations (Charpy, notch)		kJ/m2	≥33	51	≥33	53	≥33	52
4	Electric ike, perpendicular ka laminations (na transformer mmanụ na 90 ℃ +/-2 ℃)		kV/mm	≥11.8	16	≥11.8	17	≥11.8	18
5	Eletrik ike, yiri laminations (na transformer mmanụ na 90 ℃ +/-2 ℃)		kV	≥35	45	≥35	48	≥35	45
6	Ihe mgbasa dielectric (1MHz)		-	≤0.04	0.018	≤0.04	0.02	≤0.04	0.02
7	Dielectric mgbe niile (1 MHz)		-	≤5.5	4.7	≤5.5	4.8	≤5.5	4.7
8	Nguzogide Arc		s	-	-	-	182	-	-
9	Ihe nguzogide nsochi (PTI)		V	-	-	-	600	-	-
10	Mkpuchi mkpuchi mgbe imikpu n'ime mmiri		MM	≥5.0×104	3,8 x106	≥5.0×104	1,8 x107	≥5.0×104	7.1 x106
11	Ọkụ ọkụ		Ọkwa	V-0	V-0	V-0	V-0	-	-
12	Ndekọ okpomọkụ (TI)		-	≥155		≥155		≥180

Mbukota na Nchekwa

A ga-edobe mpempe akwụkwọ ahụ n'ebe okpomọkụ na-adịghị elu karịa 40 ℃, ma tinye ya n'ahịrị n'elu akwa akwa nke dị elu 50mm ma ọ bụ karịa. Wepụ ọkụ, okpomọkụ (ngwa ọkụ) na anwụ anwụ. Ndụ nchekwa nke mpempe akwụkwọ bụ ọnwa 18 site na ụbọchị ịhapụ ụlọ ọrụ mmepụta ihe. Ọ bụrụ na oge nchekwa ahụ karịrị ọnwa 18, enwere ike iji ngwaahịa ahụ mgbe anwalechara ka ọ tozuo.

Okwu na kpachara anya maka ngwa

1 Machining ga-agbaso JB/Z141-1979,Machining ụzọ mkpuchi mkpuchi laminated ngwaahịa, n'ihi na Ibé akwụkwọ nwere pụta ụwa dị iche na àgwà si metal.

2 A ga-etinye oke ọsọ na obere mkpụcha omimi mgbe ị na-arụ ọrụ n'ihi na-adịghị ike thermal conductivity nke mpempe akwụkwọ.

3 Ime na ịkpụ ngwaahịa a ga-ahapụ ọtụtụ uzuzu na anwụrụ ọkụ. Ekwesịrị ịme usoro kwesịrị ekwesị iji hụ na ọkwa uzuzu dị n'ime oke anabatara n'oge arụ ọrụ. A na-adụ ọdụ ikuku ventilashị nke mpaghara na iji uzuzu / ihe mkpuchi dị mma.

4 Ibé akwụkwọ na-edobe mmiri mgbe emechara ya, a na-atụ aro mkpuchi mkpuchi mkpuchi.

Akụkụ machining epoxy(1)
Akụkụ igwe (1) (1)

Ngwa mmepụta

3240 (7)
3240 (8)
3240 (9)
3240 (10)

Ihe ngwugwu maka mpempe akwụkwọ EPGC

3240 (12)
3240 (11)
Anyị adịla njikere ịkọrọ anyị ihe ọmụma gbasara mgbasa ozi n'ụwa niile ma na-akwado gị ngwaahịa dabara adaba na ọnụ ahịa kacha ike. Ngwa Profi na-ewetara gị ezigbo ọnụ ahịa ego ma anyị adịla njikere imepụta ibe anyị ọnụ ahịa kacha ala maka China Electric Insulation Green Epoxy Glass Fabric Laminate Sheet (G11), echiche nkwado anyị bụ ịkwụwa aka ọtọ, ike ike, eziokwu na ihe ọhụrụ. Site n'enyemaka, anyị ga-akawanye mma.
Ọnụ ego kacha ala makaChina G11 mpempe akwụkwọ, Mpempe akwụkwọ fiberglass, Na ihe mgbaru ọsọ nke "efu ntụpọ". Iji lekọta gburugburu ebe obibi, na nlọghachi mmekọrịta mmadụ na ibe ya, ọrụ nlekọta ndị ọrụ na-elekọta mmadụ dị ka ọrụ nke ya. Anyị na-anabata ndị enyi si n'akụkụ ụwa niile ka ha bịa leta ma duzie anyị ka anyị wee nweta ihe mgbaru ọsọ mmeri ọnụ.